Canon's innovative RF lens mount debuted in September 2018 in the 澳门现金网_申博信用网-官网, the first of Canon's mirrorless 澳门现金网_申博信用网-官网 System cameras. Coming just over 30 years after Canon's acclaimed EF mount was introduced, the RF mount was designed to enable a new generation of optical technology and creative possibilities.

All 澳门现金网_申博信用网-官网 System cameras have the same RF mount whether the sensor in the camera is APS-C (as in the 澳门现金网_申博信用网-官网7 and 澳门现金网_申博信用网-官网10) or full-frame (as in the 澳门现金网_申博信用网-官网1 and 澳门现金网_申博信用网-官网5 Mark II, for example). This means that all RF and RF-S lenses can be used on all 澳门现金网_申博信用网-官网 System cameras, although the field of view of any given lens will be different on an APS-C camera from a full-frame camera, because of the APS-C sensor's "crop factor".

Here we look at some key aspects of the RF mount's design and the technical advances it has made possible.

The Canon RF mount retains the same wide 54mm diameter as the EF mount, but with a big reduction in the back focus distance – the distance between the mount and the sensor – from 44mm in the EF mount to 20mm in the RF mount. This has come about because EF-mount DSLRs had to be designed around the camera's reflex mirror mechanism, but RF-mount cameras are mirrorless, which allows lens designers to prioritise optical performance and makes new optical designs possible.

In particular, lenses used to require additional optical engineering to shift the optical system forward to avoid the mirror of the camera while retaining the same focal length, but with the RF mount this is no longer the case. As a result, RF lenses can often be made more compact and more lightweight than their EF mount equivalents. For example, at approximately 323mm in length, the RF 100-300mm F2.8L IS USM is not much bigger than the older EF 300mm f.28L IS II USM, but it covers a wider range of focal lengths and is equipped with a more powerful Image Stabilizer, a Lens Control Ring and other innovative technologies. RF lenses can also be constructed with larger diameter, rear-positioned elements. This type of design helps reduce the bending of light rays as they pass through the lens, which reduces aberrations and improves overall image quality. It is now possible to have larger apertures for a given focal length and achieve corner-to-corner sharpness with minimal light fall-off.

The RF mount has a 12-pin connection between the camera and lens, compared with 8 pins in the EF mount. This enables much faster communication between lens and camera, and much greater bandwidth for data transfer. This unlocks many benefits, and gives developers scope to add even more features in the future.

One benefit is the new controls this makes possible, particularly the Lens Control Ring featured on all RF lenses in addition to the standard focus and zoom rings. This ring can be customised to control a variety of settings such as shutter speed, aperture, exposure compensation and ISO, giving you a quick and tactile way of adjusting key settings without having to take your eye from the viewfinder.

Some RF lenses are also equipped with Lens Function buttons that can be assigned with additional controls. For example, both the RF 24-105mm F2.8L IS USM Z and RF 200-800mm F6.3-9 IS USM lenses feature two buttons that by default are used to stop autofocus during Servo AF, and these can be customised via the camera’s Customise buttons menu.

In addition to customisable controls, Canon hybrid RF lenses such as the RF 24-105mm F2.8L IS USM Z and RF 35mm F1.4L VCM feature an Iris Ring. This enables fine, smooth manual adjustments of the iris in 1/32 stops when recording video, for seamless changes in exposure. It can be locked in Auto Mode when shooting stills, allowing the aperture to be controlled on the camera in the familiar way. (See the Canon RF Mount FAQs section below for more about hybrid RF lenses.)

Another benefit is in-camera correction of optical aberrations and real-time Digital Lens Optimisation (DLO). In the past, when you purchased a new lens, you had to download and register its lens correction data, so that your camera could apply the adjustments required to compensate for the optical quirks of that particular lens. Thanks to the speed of the RF mount connection, the amount of data it can handle and the processing power of the latest image processors, DLO data is stored within RF lenses and can be read automatically. What's more, DLO data can be used during continuous shooting without affecting shooting speed or the number of shots you can take, as it did in the past.

Even more notably, the speed and bandwidth of the RF mount delivers faster and more responsive autofocus performance – the 澳门现金网_申博信用网-官网5 and 澳门现金网_申博信用网-官网6, for example, can acquire focus in a class-leading 0.05 seconds and then continue to track even fast-moving subjects across the entire frame.

Thanks to the RF mount, lenses can also take advantage of new focusing technologies. The RF 70-200mm F2.8L IS USM is the first lens to feature Dual Nano USM technology – it has two Nano USM motors, each driving different lens groups, working together to produce faster, more efficient focusing. The RF 400mm F2.8L IS USM and RF 600mm F4L IS USM super-telephoto lenses are the first in the RF lineup to feature a double power drive method, enabling cameras to focus faster than ever before. While the optics and mechanics of these two lenses are largely the same as the EF versions, their capabilities are next-level, as they take full advantage of Canon's revolutionary 澳门现金网_申博信用网-官网 System and RF mount.

Technologies such as Nano USM, which combines the speed of traditional USM motors with the silent operation and smoothness of STM motors, and Voice Coil Motor (VCM), which delivers fast and fluid autofocus in fast-aperture lenses such as the RF 35mm F1.4L VCM, are a real benefit particularly for videographers as well as sport or wildlife photographers, where they are shooting fast action and super-quiet, smooth focusing is required. What's more, the RF mount enables smoother aperture adjustments when you're shooting video, with all RF lenses supporting smaller increments of just 1/8 stop as compared to the 1/3 stop used for still photography, meaning less noticeable changes in brightness as you adjust the aperture while filming.

The RF mount's speed of connection even allows electronic focus breathing suppression to prevent the angle of view from changing as you focus. Non-RF cinema lenses tend to be very large because they incorporate a mechanical mechanism to help overcome focus breathing, but the RF mount, coupled with the use of Nano USM technology and floating focus groups, means this can now be done electronically, enabling a very compact lens design for video.

Canon’s dedicated RF mount cinema primes and hybrid lenses come with built-in focus breathing suppression. The high speed and bandwidth of the RF mount also bring additional performance benefits for video production, including advanced metadata support and distortion correction with the CN-R Primes.

One of the most important technical innovations made possible by the innovative design of the RF mount is superior image stabilisation (IS).

The speed and bandwidth of communication between camera and lens mean that even in 澳门现金网_申博信用网-官网 System cameras that do not have sensor-shifting In-body Image Stabilisation (IBIS), a Dual Sensing IS system monitors motion information from the camera's CMOS sensor, which is more sensitive than the lens's optical IS to low-frequency camera shake such as that caused by the photographer's heartbeat or breathing, and this extra information is used to deliver enhanced shake correction – in practice half a stop or more of additional stabilisation.

In addition, in those cameras that do have the IBIS system introduced in the 澳门现金网_申博信用网-官网5 and 澳门现金网_申博信用网-官网6, the camera's IBIS can work co-operatively with the optical IS in IS-equipped lenses to tackle a wider range of camera shake than either system alone. Optical IS is especially effective at telephoto focal lengths, for example, while IBIS is most effective at correcting shake that occurs at wider focal lengths.

The RF mount's wide throat also means that lenses with a large image circle can get the full benefit of the IBIS system – the sensor has more room to move to offset image shake without the risk of cutting off the image. This enables the camera's IBIS system to deliver up to 8-stops of stabilisation when using lenses that do not feature built-in optical IS but have large image circles, such as the RF 28-70mm F2L USM and RF 85mm F1.2L USM.

Canon’s 5-axis IBIS technology continues to break new ground for handheld photography and filmmaking, with the IBIS systems in the 澳门现金网_申博信用网-官网5 Mark II and 澳门现金网_申博信用网-官网1 being capable of delivering up to 8.5-stops of stabilisation at the centre of the image, depending on the lens being used.

You'll find the current Canon RF lens range on the RF lens product page. The Canon RF lens lineup is continuing to evolve, with new lenses being released every year. A new category of RF-S lenses has been added, specially designed for use with APS-C 澳门现金网_申博信用网-官网 System cameras such as the 澳门现金网_申博信用网-官网7 and 澳门现金网_申博信用网-官网10. Hybrid RF lenses are optimised to meet the needs of photography and videography alike, and a range of innovative stereoscopic dual lenses has been introduced for immersive 3D/VR capture. With RF lens options as wide as 5.2mm and as long as 1200mm, the lineup already offers the widest range of focal lengths available in a mirrorless system, and Canon intends to provide a focal length for every subject, for every photographer.

At the heart of the RF lens range are Canon's "Trinity" of f/2.8 zoom lenses – a wide-angle zoom, a standard zoom and a telephoto zoom lens. Together, these three should give professional photographers enough flexibility to shoot almost any subject in any situation.

Canon's RF Trinity lenses are the RF 15-35MM F2.8L IS USM, RF 24-70MM F2.8L IS USM and RF 70-200mm F2.8L IS USM. All feature a fast f/2.8 aperture, optical image stabilisation and a silent Nano USM autofocus motor. Their versatility means they can shoot everything from landscapes and portraits to sport and wildlife.

The RF 100-300mm F2.8L IS USM further extends the flexibility of the line-up. Sharing the same fast aperture, rapid autofocus and optical image stabilisation technology as the other professional f/2.8 zooms, it's ideal when you need to pull more distant subjects into view. This type of telephoto zoom wasn't available as part of the older EF range, and its compact design and refined performance are possible only because of the RF mount.

Canon also offers 1.4x and 2x lens extenders or teleconverters for certain RF lenses, which offer greater reach without sacrificing image quality. This is achieved through the use of high-refraction, low-dispersion glass, which helps reduce the chromatic aberrations that tend to come with magnification.

The design of both RF extenders also features special lens coatings and a three-layer structure to reduce ghosting, and the white exterior familiar on Canon's telephoto L-series lenses prevents the extenders from getting too hot, ensuring optimum performance.

Because of their physical construction, however, only a few lenses can accept lens extenders. Also, using the Canon Extender RF 1.4x incurs a 1-stop reduction in the maximum aperture and using the Extender RF 2x brings a 2-stop reduction, but the lenses can still focus automatically.

What does RF mean in Canon lenses?

When the Canon EOS system was introduced, the name stood for Electro-Optical System. As the EF mount was a fully electronic mount, EF stood for Electronic Focus.

Canon's project to develop the next generation of EOS cameras had the aim of "Reimagining optical excellence" and was hence codenamed Project R. This in turn led to the official name of the 澳门现金网_申博信用网-官网 System. For the lenses, a fusion of EF and R resulted in the name RF lenses, which simply means Canon lenses designed for use with 澳门现金网_申博信用网-官网 System cameras, which have the new RF mount.

What are RF-S lenses?

The category of RF-S lenses was introduced to provide affordable, general-purpose lenses designed for use with APS-C 澳门现金网_申博信用网-官网 System cameras, so the RF-S 18-45mm F4.5-6.3 IS STM is the ideal kit lens to pair with the Canon 澳门现金网_申博信用网-官网10, for example. The RF mount on an RF-S lens is identical to the mount on all RF lenses, and RF-S lenses are compatible with all 澳门现金网_申博信用网-官网 System cameras. However, full-frame 澳门现金网_申博信用网-官网 System cameras, when fitted with an RF-S lens, will automatically crop the image area to match the APS-C coverage of the lens.

Do Canon RF lenses fit onto an EF mount?

No, Canon RF lenses are not compatible with Canon EF-mount DSLRs, nor is there an adapter for RF mount lenses to attach to EF mount cameras. Find out more about lens compatibility.

Can Canon EF lenses be used on an RF mount camera?

Even though they share the same mount diameter, EF lenses cannot be fitted directly on an RF mount. You can however use EF and EF-S lenses on an 澳门现金网_申博信用网-官网 System camera using a choice of EF-澳门现金网_申博信用网-官网 Mount Adapters.

All these mount adapters enable full communication between an EF lens and the 澳门现金网_申博信用网-官网 System camera. This means autofocus functionality, chromatic aberration correction and lens metadata are all fully supported just as they would be on an EF-mount camera.

Why are Canon RF lenses better?

Canon RF lenses are better than EF lenses because the RF mount architecture enables much faster communication between the camera and the lens, much greater data transfer, and support for the latest focusing, image stabilisation and optical technologies. The reduced back focus distance also allows for lens designs with no performance compromises.

What are hybrid RF lenses?

Canon hybrid RF lenses provide professional features and capabilities that meet the needs of both photographers and filmmakers. Designed for content creators using a hybrid workflow, these versatile primes and zooms feature smooth autofocus for video and stills, fast apertures for creative depth of field control, and an Iris Ring for precise aperture adjustments when shooting movies. Hybrid prime lenses such as the RF 24mm F1.4L VCM and RF 50mm F1.4L VCM share the same dimensions and filter thread size, making it easy to switch between them when filming with a gimbal or rig. The RF 24-105mm F2.8L IS USM Z and RF 70-200mm F2.8L IS USM Z hybrid zooms share the same design too, and offer extended reach and professional zooming and control for video.

What are RF VR lenses?

Canon VR lenses and stereoscopic lenses provide an all-in-one solution for creating immersive 3D content. The innovative Dual Lens design of lenses such as the RF-S 3.9mm F3.5 STM DUAL FISHEYE enables left-eye and right-eye perspective images to be captured simultaneously on a single camera sensor. As part of Canon's EOS VR SYSTEM, the Canon EOS VR Utility or EOS VR Plug-in for Adobe Premiere Pro¹ can then be used to convert the captured stereoscopic video and stills into a standard VR image file.

What are CN-R lenses?

CN-R lenses are Canon’s first RF mount, full-frame cinema lenses, designed for professional filmmakers using RF mount Cinema EOS cameras such as the EOS C80 and 澳门现金网_申博信用网-官网5 C. The compact CN-R Primes are engineered to meet the demands of 4K, 8K and HDR video production. Like Canon's EF and PL mount Cine Prime lenses, they feature high-precision focus and iris rings, an 11-blade iris, constant gearing and minimal focus breathing, but RF Cine Prime lenses benefit from the high-speed and high-bandwidth communication of the RF mount. This enables advanced features such as in-camera distortion correction and real-time metadata capture, which is essential for virtual productions and visual effects workflows.