News Archive

“AMNESIA:33”: Embedded TCP/IP Stacks vulnerabilities – Updated 10 December 2020

Following investigation, we have determined that no imageRUNNER, imageRUNNER ADVANCE or i-SENSYS products are affected by this vulnerability. We are continuing our investigation across the Canon product range and will update this article as further information becomes available.

uniFLOW MicroMIND vulnerability – Updated 08 December 2020

It has been brought to our attention by the 'Federal Office for Information Security' (BSI) that the network implementation within the microMIND is vulnerable to a number of exploits. These vulnerabilities were discovered by 'Forescout Technologies', researchers Jos Wetzels, Stanislav Dashevskyi, Amine Amri, and Daniel dos Santos.

The microMIND utilises the uIP open-source network stack, https://en.wikipedia.org/wiki/UIP_(micro_IP) used by thousands of companies to network enable their software/hardware. The researchers found that if exploited these vulnerabilities could result in a DoS attack taking the device offline or performing Remote Code Execution (RCE) on the microMIND itself. To address these vulnerabilities NT-ware has released a new firmware that addresses all reported issues. At the time of writing this security bulletin there are no known exploits targeting the microMIND.

Exploit name/link: AMNESIA:33, https://www.forescout.com/amnesia33/

CVE's addressed in this firmware are: CVE-2020-13988, CVE-2020-13987, CVE-2020-17438, CVE-2020-17437

CVE's not related to the MicroMIND implementation of the uIP Stack: CVE-2020-17440, CVE-2020-17439, CVE-2020-24334, CVE-2020-24335

Affected uniFLOW microMIND Firmware: version 2.0.9 and earlier or delivered prior to October 2020.

Mitigation/Action: If you have an affected microMIND please contact your Canon representative to arrange upgrading the firmware.

Canon Laser and Small Office Multifunctional Printer related vulnerabilities with the IP Stack – Updated 01 October 2020

A cyber security company headquartered in Israel, SCADAfence Ltd., drew our attention to a vulnerability related to IP stack protocol, which is used by Canon Laser Printer and Small Office Multifunctional Printer. Please refer to CVE-2020-16849 for details.

The potential exists for a third-party attack on the device when it is connected to a network allowing fragments of the “Address book” or/and “administrator password” to be acquired through an unsecured network. It should be noted that when HTTPS is used for the communication of Remote UI, data is secured by encryption.

To date, there have been no confirmed cases of these vulnerabilities being exploited to cause harm. However, in order to ensure that our customers can use our products securely, new firmware will be available for the following products:

i-SENSYS MF Series
MF113W
MF212W/MF216N/MF217W
MF226DN/MF229DW
MF231/MF232W/MF237W
MF244DW/MF247DW/MF249DW
MF264DW/MF267DW/MF269DW
MF4570DN/MF4580DN
MF4780W
MF4870DN/MF4890DW

i-SENSYS LBP Series
LBP113W
LBP151DW
LBP162DW

imageRUNNER Series
IR2202N
IR2204N/IR2204F
IR2206N/IR2206IF

Please refer to the User Manual for details on how to update firmware.
We recommend that a private IP address is used for products and use network parameter controls such as the use of a firewall or Wi-Fi router that can restrict network access. The ‘Security for Products Connected to a Network’ section further down on this page gives some additional guidance.

“Ripple20”: Multiple Vulnerabilities Identified in the TCP/IP Stack – Updated 30 September 2020

After investigation into the ‘Ripple20’ vulnerability, there has been no identified issue with Canon printer products.

Security provided by eight character numerical passwords – Added 06 March 2020

Whilst Canon’s wireless function password complies with the current WPA standard, we are aware that the security provided by eight-character numerical passwords isn’t considered to be as strong as it used to be. With this in mind, we recommend that in environments where wireless security is a concern, such as a public location, Canon equipment should always be connected to infrastructure Wi-Fi deployment. We take security seriously - we are updating the Wi-Fi security configurations across our products to help you remain secure and any update will be published on these pages. Canon would like to thank REDTEAM.PL for drawing our attention to the changing nature of password security and its impact on the market.

ImageRUNNER ADVANCE Syslog and Log events – Added 20 February 2020

The imageRUNNER ADVANCE software platform version 3.8 and later introduced the Syslog protocol (compliant with RFC 5424, RFC 5425 and RFC 5426) near real-time event messaging functionality adding to existing device logging increasing visibility of device and device security events. This builds upon the device logging capability allowing connection to an existing security information event management (SIEM) or Syslog server. The ‘SIEM_spec’ document given below details of the messages types and log data that can be generated.

VxWork Operating System vulnerability – Revised 03 October 2019

Eleven vulnerabilities, dubbed “URGENT/11” (CVE-2019-12255 through to CVE-2019-12265), have been identified within the VxWorks operating system. It has transpired that the IPnet TCP/IP stack used in the VxWorks operating system has also been used in other real-time operating systems, opening up the possibility for vulnerabilities (CVE-2019-12255, CVE-2019-12262 and CVE-2019-12264) to exist in a broader range of products.

A number of legacy European models may be vulnerable to this issue as they have been identified as using the affected IPnet TCP/IP stack:

• i-SENSYS MF4270
• i-SENSYS MF4370dn
• i-SENSYS MF4380dn
• imageRUNNER 2318
• imageRUNNER 2318L
• imageRUNNER 2320
• imageRUNNER 2420
• imageRUNNER 2422

Security advisory for Canon digital cameras related to PTP (Picture Transfer Protocol) communication functions and firmware update functions – Added 6 August 2019

Thank you very much for using Canon products.

An international team of security researchers has drawn our attention to a vulnerability related to communications via the Picture Transfer Protocol (PTP), which is used by Canon digital cameras, as well as a vulnerability related to firmware updates.

(CVE-ID:CVE-2019-5994, CVE-2019-5995, CVE-2019-5998, CVE-2019-5999, CVE-2019-6000, CVE-2019-6001）

Due to these vulnerabilities, the potential exists for third-party attack on the camera if the camera is connected to a PC or mobile device that has been hijacked through an unsecured network.

At this point, there have been no confirmed cases of these vulnerabilities being exploited to cause harm, but in order to ensure that our customers can use our products securely, we would like to inform you of the following workarounds for this issue.

• Ensure the suitability of security-related settings of the devices connected to the camera, such as the PC, mobile device, and router being used.
• Do not connect the camera to a PC or mobile device that is being used in an unsecure network, such as in a free Wi-Fi environment.
• Do not connect the camera to a PC or mobile device that is potentially exposed to virus infections.
• Disable the camera’s network functions when they are not being used.
• Download the official firmware from Canon’s website when performing a camera firmware update.

There is an increase use of PCs and mobile devices in an unsecure (free Wi-Fi) network environment where customers are not aware of the network security. As it has become prevalent to transfer images from a camera to a mobile device via Wi-Fi connection, we will implement firmware updates for the following models that are equipped with the Wi-Fi function.

These vulnerabilities affect the following EOS-series digital SLR and mirrorless cameras:
EOS-1DC*1 *2	EOS 6D Mark II	EOS 760D	EOS M6 Mark II	PowerShot SX740 HS
EOS-1DX*1 *2	EOS 7D Mark II*1?	EOS 800D	EOS M10
EOS-1DX MK II*1 *2?	EOS 70D	EOS 1300D	EOS M50
EOS 5D Mark III*1	EOS 77D	EOS 2000D	EOS M100
澳门现金网_申博信用网-官网	EOS 80D	EOS 4000D	澳门现金网_申博信用网-官网
EOS 5DS*1	EOS 200D	EOS M3	EOS?RP
EOS 5DS R*1	EOS 250D	EOS M5	PowerShot G5X Mark II
EOS 6D	EOS 750D	EOS M6	PowerShot SX70?HS

^*1?If a WiFi adapter or a Wireless file transmitter is used, WiFi connection can be established.

^*2?Ethernet connections are also affected by these vulnerabilities.

Firmware update information will be provided for each product in turn starting from products for which preparations have been completed.

uniFLOW Authentication issue – Revised 19 March 2019

Please find instructions to?install the hotfix here?

We are committed to providing secure solutions to our customers and apologise for any inconvenience this situation has caused. Should you require further information regarding this advisory, please contact your local Canon office, authorised reseller or Canon support representative. If you notice any suspicious activity, please report these immediately to your account manager and IT department.?

Fax Vulnerability - Added 31 August 2018?

Recently, researchers reported on vulnerabilities found in the communication protocols in the fax functions of certain products. (CVE-ID: CVE-2018-5924, CVE 2018-5925). For information regarding the impact of these vulnerabilities on Canon products equipped with fax functions, please see below:

Based on our review, as they do not employ the colour G3 Fax Protocol exploited by these vulnerabilities, the following products are unaffected:?imageRUNNER/iR, imageRUNNER ADVANCE, LASER CLASS, imagePRESS, FAXPHONE, GP?and?imageCLASS/i-SENSYS?series models equipped with fax functions.

MAXIFY?and?PIXMA?series products equipped with fax functions do make use of the Colour G3 Fax Protocol. However, we have not identified any risk of malicious code being executed via the fax circuit or risk to the security of information saved on these devices.

We will continue to monitor this situation and take appropriate action necessary to help ensure the security of our devices.

Spectre and Meltdown CPU Security Vulnerabilities - Added 08 March 2018??

Vulnerabilities were recently made public regarding certain CPUs from Intel, AMD and ARM that make use of speculative execution to improve their performance. These vulnerabilities may allow an attacker to gain unauthorised access to areas of private cached memory.

Two variants of the vulnerabilities that use different techniques to exploit the speculative execution functions within the affected CPUs were identified and named. They are CVE-2017-5715, CVE-2017-5753: “Spectre” and CVE-2017-5754: “Meltdown”.

The following Canon external controller products may be impacted by the vulnerabilities. Though there is currently no known way to exploit these vulnerabilities, countermeasures are being prepared so that customers can continue to use our products without concern.

ColorPASS:?
GX300 v2.0, GX300 v2.1, GX400 v1.0, GX500 v1.1

imagePASS:?
U1 v1.1, U1 v1.1.1, U2 v1.0?
Y1 v1.0, Y2 v1.0

imagePRESS-CR Server:?
A7000 v2.1, A7000 v3.0, A7300 v1.0, A7500 v2.1, A8000 v1.1

imagePRESS Server:?
A1200 v1.0, A1200 v1.1, A1300 v1.0, A2200 v1.0, A2200 v1.1, A2300 v1.0, A3200 v1.0, A3200 v1.1, A3300 v1.0?
B4000 v1.0, B4100 v1.0, B5000 v1.0, B5100 v1.0?
F200 v1.21, H300 v1.0?
J100 v1.21, J200 v1.21?
K100 v1.0, K200 v1.0?
Q2 v2.0, Z1 v1.0

The following Canon service may be impacted by the vulnerabilities. Though there is currently no known way to exploit these vulnerabilities, countermeasures were put in place by end of February 2018.

MDS Cloud

All Canon laser multifunction printers and Canon laser printers and their related software products, except the above-mentioned, are not affected by these vulnerabilities through any known exploitation process. Customers can continue using our products reliably.

Canon is constantly working to ensure the highest level of security is reached in all our products and solutions. We take the security of our customer information seriously and its protection is our utmost priority.

Vulnerability in WPA2 Wi-Fi Encryption Protocol - Added 16 January 2018?

Recently, a researcher made public a vulnerability known as KRACKs in the standard wireless LAN (Wi-Fi) encryption protocol WPA2. This vulnerability allows an attacker to intentionally intercept the wireless transmission between the client (terminal equipped with Wi-Fi functionality) and the access point (the router etc.) to perform potentially malicious activity. For that reason, this vulnerability cannot be exploited by anyone outside the range of the Wi-Fi signal or by anyone in a remote location using the internet as an intermediary.?

We have yet to confirm that any issues have been encountered by users of Canon products as a result of this vulnerability, however, in order to allow customers to continue using our products with peace of mind, we recommend the following preventative measures:?
?Use a USB cable or Ethernet cable to directly connect compatible devices to a network?
?Encrypt data transmission from devices that enable encryption settings (TLS/IPSec)?
?Use such physical media as SD cards with compatible devices?
?Use such settings as Wireless Direct and Direct Connect with compatible devices

As the operation procedures and functions offered vary from device to device, please consult your device’s manual for more details. We also recommend you take appropriate measures for such devices as your PC or smartphone. For information on the appropriate measures for each device, please contact the device’s manufacturer.